BMW And Lumissil Demonstrate Power Line Communication For BMS
BMW Group and Lumissil Microsystems have demonstrated power line communication across a complete BMW Gen6 800 V battery system, carrying data between the BMS controller and the cell supervisory circuits with no dedicated communication wiring.
Summary: BMW Group and Lumissil Microsystems have demonstrated power line communication (PLC) across a complete BMW Gen6 800 V battery system, the battery launched in the new BMW iX3 earlier in 2026. Their “No New Wire” approach carries communication between the central battery management system (BMS) controller and the Cell Supervisory Circuits (CSCs) through the battery’s existing electrical infrastructure, with no dedicated communication wiring for the PLC network.
Key engineering takeaway: Testing on the Gen6 battery showed reliable, bidirectional, multi-node power line communication across the high-voltage battery. Cell measurement data and control commands were transmitted at cell level and complete-battery level, under varying voltage and current conditions and representative automotive operating scenarios.
Why it matters: According to the release, removing the dedicated communication wiring and connectors between the BMS controller and the CSCs offers the potential to simplify battery system design, reduce weight and cost and improve reliability, and the approach’s flexibility across battery configurations could enable more scalable BMS architectures. BMW Group and Lumissil will continue their technical collaboration on power line communication for future electric vehicle battery systems.
Technical collaboration with BMW Group validates reliable, bidirectional Power Line Communication using the existing electrical infrastructure of the BMW’s Gen6 battery system.
BMW Group and Lumissil Microsystems have successfully demonstrated Power Line Communication (PLC) technology across a complete BMW Gen6 800 V battery system, marking an important milestone toward simpler, lighter, and more scalable Battery Management System (BMS) architectures for future electric vehicles.
The joint work demonstrates a “No New Wire” approach that enables communication between the central BMS controller and Cell Supervisory Circuits (CSCs) through the battery’s existing electrical infrastructure, eliminating the need for dedicated communication wiring for the PLC network.
Power Line Communication Tested Across The BMW Gen6 Battery
The technology was extensively tested on the BMW Gen6 battery system, which was launched in the new BMW iX3 earlier in 2026, demonstrating reliable, bidirectional, multi-node communication across the high-voltage battery.
Successful transmission of cell measurement data and control commands was demonstrated at cell, and complete battery levels, under varying voltage and current conditions and representative automotive operating scenarios. These results highlight the technology’s flexibility and potential applicability to different battery architectures.
“Our joint work with Lumissil has demonstrated that reliable, bidirectional communication can be achieved using the existing electrical infrastructure of a complete 800 V battery system. This is an important step toward simpler, more efficient, and scalable battery management architectures for future electric vehicles.” — Thomas Glass, BMW Group, Senior Expert, Development E/E HV-Storage, BMW Group.
Removing Dedicated Communication Wiring, Weight And Cost
By eliminating the need for dedicated communication wiring and connectors, the “No New Wire” approach offers the potential to significantly simplify battery system design, reduce weight and cost, and improve reliability. Its flexibility across different battery configurations could also enable more scalable BMS architectures, simplifying integration into future electric vehicle battery platforms.
“Our goal is to simplify the way battery systems communicate. By leveraging the electrical infrastructure already present in the battery, we can reduce wiring complexity while enabling greater flexibility in BMS design. The successful demonstration with BMW represents an important step toward bringing these benefits to future electric vehicles.” — Nadav Katsir, VP & GM of Connectivity Business Unit, Lumissil Microsystems.
BMW Group and Lumissil Microsystems will continue their technical collaboration to further advance PLC-based communication technology for future electric vehicle battery systems.
Power Line Communication: Frequently Asked Questions
What is power line communication (PLC) in a battery?
Power line communication is a technique that sends data over conductors that already carry electrical power, by superimposing a modulated signal on them, so a separate communication cable is not needed. In the BMW Group and Lumissil demonstration, it carries communication between the central BMS controller and the Cell Supervisory Circuits through the battery’s existing electrical infrastructure.
What are Cell Supervisory Circuits (CSCs)?
Cell Supervisory Circuits are the electronics distributed through a battery pack that measure cell-level quantities such as voltage and temperature, report them to the central BMS controller and act on commands sent back from it. In the demonstration, cell measurement data and control commands passed between the BMS controller and the CSCs over power line communication.
How was power line communication tested on the BMW Gen6 battery?
The technology was tested on a complete BMW Gen6 800 V battery system, demonstrating reliable, bidirectional, multi-node communication across the high-voltage battery. Transmission of cell measurement data and control commands was shown at cell level and complete-battery level, under varying voltage and current conditions and representative automotive operating scenarios.
What are the potential benefits of the “No New Wire” approach?
According to the release, eliminating dedicated communication wiring and connectors offers the potential to simplify battery system design, reduce weight and cost, and improve reliability. Its flexibility across different battery configurations could also enable more scalable BMS architectures and simpler integration into future electric vehicle battery platforms.
Which vehicle uses the BMW Gen6 battery system?
The release states that the BMW Gen6 battery system on which the power line communication technology was tested was launched in the new BMW iX3 earlier in 2026.
Further Reading
- BMW Gen6 eDrive: Cylindrical Cells, Energy Master, Neue Klasse
- BMW iX3 M60 xDrive Debuts With 450 kW Dual-Motor Powertrain
- NXP Announces Industry-First Ultra-Wideband Wireless Battery Management System
- Infineon and EVE Energy Collaborate on Battery Management Technology
For more battery news, click here.
ATN publishes first-party announcements within seven days of release. The summary at the top is written by ATN for engineers; the text below it is the company's own.



