TIER IV Brings Native Autoware Support To CARLA 1.0 Simulator
TIER IV has contributed native Autoware support to CARLA 1.0, letting Autoware exchange sensor data, control commands and vehicle status directly with the open-source simulator without a separate Python-based bridge.
Summary: TIER IV, which pioneered the Autoware open-source software for autonomous driving, has contributed native Autoware support to CARLA 1.0, a major release of the open-source simulator for autonomous driving development and testing. The integration lets Autoware exchange sensor data, control commands and vehicle status directly with CARLA, without a separate Python-based bridge.
Key engineering takeaway: Native Autoware support builds on CARLA’s existing native ROS 2 interfaces, so developers connect Autoware through CARLA’s launch configuration instead of setting up an intermediate bridge, which the release says required additional setup and introduced overhead in data exchange. TIER IV developed the integration internally before the CARLA team ported it into CARLA 1.0, and its engineers also contributed to CARLA’s migration from Unreal Engine 4 to Unreal Engine 5.
Why it matters: For engineers validating autonomous driving software in simulation, removing the bridge reduces the software layers between the driving stack and the simulator, and TIER IV says the approach is expected to improve responsiveness and processing efficiency. According to the release, native Autoware support also supports the evaluation of both conventional modular autonomous driving systems and emerging AI-based approaches in simulation, and lowers technical barriers for developers building and testing them.
Simplifying autonomous driving development through open-source collaboration
TIER IV, the pioneering force behind Autoware, open-source software for autonomous driving, has contributed to native Autoware support in CARLA 1.0, a major release of the open-source simulator for autonomous driving development and testing. Building on CARLA’s existing native ROS 2 interfaces, the new support enables Autoware to exchange sensor data, control commands and vehicle status directly with the simulator, without a separate Python-based bridge. This simplifies integration and reduces the software layers involved in simulation.
CARLA is an open-source simulator that enables developers to test autonomous driving systems in realistic virtual environments, reproducing roads, traffic conditions, and sensor data.
Native Autoware Support Removes The Python-Based Bridge
Early CARLA–Autoware workflows relied on a separate Python-based bridge, requiring additional setup and introducing overhead in data exchange. CARLA’s native Autoware support removes this intermediate layer, allowing developers to connect Autoware through CARLA’s launch configuration.
This streamlined approach simplifies development workflows and is expected to improve responsiveness and processing efficiency. It also supports the evaluation of both conventional modular autonomous driving systems and emerging AI-based approaches in simulation.
TIER IV Contributions To CARLA And The Autoware Foundation
The native integration originated from discussions within the Autoware Foundation (AWF) community on establishing direct interoperability between Autoware and CARLA.
TIER IV began developing native CARLA–Autoware integration internally, and the CARLA team ported this work into CARLA 1.0. Its engineers also made sustained involvement in the CARLA open-source community and contributions to CARLA’s migration from Unreal Engine 4 to Unreal Engine 5, helping advance the simulator for the wider open-source community. These efforts helped establish a collaborative development process with CARLA maintainers and other contributors, supporting the implementation of native Autoware connectivity.
TIER IV plans to continue contributing improvements from its internal development, including optimized LiDAR point cloud output and enhanced vehicle models, to the upstream CARLA project.
Through this activity, TIER IV aims to make autonomous driving development and validation more accessible worldwide, working alongside contributors from AWF and the CARLA community.
Lowering Barriers For Autoware Developers In Simulation
By simplifying integration between CARLA and Autoware, native support lowers technical barriers for developers building and testing autonomous driving systems. Alongside initiatives such as Autoware 2.0, accessible simulation environments can help expand the global Autoware ecosystem and accelerate the adoption of open-source autonomous driving technologies.
“Open-source software creates the foundation for the democratization of autonomous driving, but developers also need practical environments to build and validate real-world systems,” said Shinpei Kato, founder and CEO of TIER IV. “By contributing to CARLA’s development and native integration with Autoware, we are helping connect two important open-source communities. We look forward to expanding this collaboration and making autonomous driving development more accessible to organizations around the world.”
Native Autoware support is included in CARLA 1.0 release. Technical documentation, installation instructions, and implementation details are available through the following resources:
- CARLA native ROS 2 documentation
- CARLA download and installation guide
- CARLA GitHub repository
- Autoware–CARLA integration discussion
- TIER IV’s CARLA–Autoware integration repository
Native Autoware Support In CARLA: Frequently Asked Questions
What is native Autoware support in CARLA?
Native Autoware support in CARLA is a direct connection between the Autoware autonomous driving software and the CARLA simulator, included in CARLA 1.0, that lets the two exchange sensor data, control commands and vehicle status without a separate Python-based bridge. It builds on CARLA’s existing native ROS 2 interfaces, and developers connect Autoware through CARLA’s launch configuration.
What is the CARLA simulator?
CARLA is an open-source simulator that enables developers to test autonomous driving systems in realistic virtual environments, reproducing roads, traffic conditions and sensor data. CARLA 1.0 is a major release of the simulator, and it includes native Autoware support.
What is Autoware?
Autoware is open-source software for autonomous driving, pioneered by TIER IV, and a registered trademark of the Autoware Foundation (AWF). As an autonomous driving software stack, it takes in sensor data and outputs vehicle control commands, which is why a simulator connected to it has to exchange sensor data, control commands and vehicle status with it.
How did CARLA and Autoware connect before CARLA 1.0?
Early CARLA–Autoware workflows relied on a separate Python-based bridge, which required additional setup and introduced overhead in data exchange. Native Autoware support in CARLA 1.0 removes this intermediate layer.
What is ROS 2?
ROS 2 (Robot Operating System 2) is open-source middleware that lets the software components of a robotic or automated system exchange data through a common communication layer, typically by publishing and subscribing to named data streams. Native Autoware support in CARLA builds on CARLA’s existing native ROS 2 interfaces.
Further Reading
- TIER IV Open-Sources End-To-End Autonomous Driving AI Models
- ISO Publishes ISO/PAS 34506 For Automated Driving Simulation
- PTV Vissim Traffic Simulation Integrates With rFpro For ADAS
- Volkswagen Group Builds AV Data Flywheel For Virtual Validation
For more autonomous driving news, click here.
ATN publishes first-party announcements within seven days of release. The summary at the top is written by ATN for engineers; the text below it is the company's own.



