What Is An 800V Architecture? An Engineer’s Guide To 800V vs 400V
ATN’s engineer’s guide to 800V EV architecture covers insulation coordination, contactors, the silicon carbide question and the three disclosed ways 800V cars charge on 400V chargers.
ATN’s engineer’s guide to 800V EV architecture covers insulation coordination, contactors, the silicon carbide question and the three disclosed ways 800V cars charge on 400V chargers.
An engineer’s guide to the automotive thermal camera: how an uncooled microbolometer works, what NETD and pixel pitch tell you, and which products actually claim ISO 26262.
An engineer’s guide to the Level 2++ label: why every system sold under it is still SAE Level 2, what separates it from Level 3, and how UN R171, China’s GB 47955-2026 and Euro…
A zonal E/E architecture groups vehicle controllers by where they sit rather than what they do, and this guide explains what a zone ECU actually does, how much harness mass the approach saves and…
A range extender generates electricity but never drives the wheels. ATN’s explainer: how the architecture works, why the continuous generator rating is the binding spec, the conversion and cold-start penalties, and where the numbers…
An image signal processor converts raw sensor data into the image a perception model actually sees. ATN’s explainer: the pipeline stage by stage, machine vision versus human tuning, where the ISP sits, and why…
Battery immersion cooling is moving from hypercars towards series production. ATN's explainer: how single-phase and two-phase systems work, what published data shows versus cold plates, and who is running it in 2026.
Traction inverters explained: how SiC MOSFETs are replacing silicon IGBTs in 800-volt EV platforms, what the DC-link, gate driver and power module actually do, and where the next round of gains comes from.
Driver-in-the-Loop (DIL) simulators explained: how they close the simulation loop around a real human driver in real time, the hardware and software stack, and the vendors building the F1 and ADAS-validation tools used today.
High power density electric motors explained: how PMSM, induction, axial flux and externally-excited synchronous machines compare, why cooling now sets the continuous rating, and where 2026 kW/kg numbers really stand.
Variable Turbine Geometry (VTG) explained: how moving turbine vanes give a single turbo the low-end torque of a small unit and the top-end power of a large one — and why this matters for…
Steer-by-wire removes the mechanical column between the steering wheel and the road wheels. ATN's pillar explainer: how it works, who's shipping in 2026 (Nexteer, Mercedes/ZF), ASIL D functional-safety architecture, and what engineers should watch…
Brake-by-wire is the most quietly significant chassis change in a decade. ATN's pillar explainer: how EHB and EMB architectures work, who's shipping in 2026 (Brembo Sensify, Bosch, Continental, ZF), and what engineers should watch…
BEV, HEV, PHEV and REEV powertrains compared on the engineering metrics that matter — battery cost, charging access, regulatory exposure and CO2-per-dollar.