Skip to content
Sunday 22 November 2026 · Automotive technology news for engineers

CamMotive Launches Powertrain In The Loop hub dyno

CamMotive has launched a Powertrain in the Loop platform at its Cambridge hub dyno facility, pairing dSPACE SCALEXIO hardware-in-the-loop with an 1100 V, 500 kW battery simulator so EV integration work can start before prototype hardware exists.

ATN Editorial Team Source: cammotive.com 6 min read
CamMotive Powertrain in the Loop test rig at the Cambridge hub dyno facility, with a powertrain mounted for hardware-in-the-loop testing
Credit: CamMotive.

Summary: CamMotive has launched a Powertrain in the Loop platform at its Cambridge hub dyno facility, opening it to automotive OEMs and Tier 1 suppliers. Powertrain in the Loop runs real powertrain hardware on the dyno inside a real-time simulated vehicle, so subsystems that do not yet exist in metal are modelled rather than waited for. CamMotive says the capability was proven over a 12-month hybrid supercar programme run with its ICE testing group, Cambustion.

Key engineering takeaway: The cell combines dSPACE SCALEXIO hardware-in-the-loop with an 1100 V, 500 kW battery simulator, and supports both 2WD and 4WD architectures. Electric propulsion already built into a chassis is driven through the wheel hubs, with the dynamometers reproducing transient conditions from legislative drive cycles up to torque-vectoring work. Ambient control extends down to -15°C. The battery simulator lets engineers investigate range, energy management, fault handling and control strategies before production-intent battery hardware is available.

Why it matters: CamMotive says that as EV programmes involve more software, electronics and system interaction, understanding how vehicle systems behave together has become as important as validating individual components. A Powertrain in the Loop cell models systems not yet available in physical form in real time, so integration and validation work can progress in parallel with vehicle build.

CamMotive customers can now use the new Powertrain in the Loop (PiL) platform to develop, integrate and validate Electric Vehicle systems – long before a prototype vehicle is available.

Developed at our Cambridge Hub Dyno facility, the system enables manufacturers to test and validate a subset of a vehicle’s physical hardware within a representative virtual vehicle environment. Systems that are not yet available in physical form can be modelled in real time, allowing vehicle integration and validation activities to begin much earlier in the development programme.

Manufacturers can assess vehicle behaviour, develop control strategies and investigate interactions between systems before a prototype vehicle is available, allowing development activities to progress in parallel and reducing programme risk. The capability has already been proven during a dedicated 12-month development programme supporting a hybrid electric supercar with our ICE testing group Cambustion – and is now available to automotive OEMs and Tier 1 suppliers.

Using Hardware in the Loop (HiL) technology, systems that are not yet available in physical form can be represented in real time. Manufacturers can simulate electronic hardware such as steering, braking, battery systems and onboard diagnostics, enabling engineers to validate functionality, investigate system interactions and identify integration issues earlier in the programme.

Why EV Integration Testing Is Moving Earlier

Modern EV development programmes involve increasing levels of software, electronics and system interaction. As a result, understanding how vehicle systems behave together has become as important as validating individual components.

Using Hardware-in-the-Loop (HiL) technology, manufacturers can represent unavailable vehicle subsystems in real time, including steering, braking, battery systems and onboard diagnostics. This enables engineers to validate functionality, investigate interactions between systems and identify integration challenges much earlier in the development cycle.

CamMotive Director, Bruce Campbell commented:

“Our Powertrain in the Loop platform provides an efficient way to accelerate vehicle development within increasingly compressed programme timelines. By combining physical hardware with advanced simulation, we can understand how systems will interact before vehicle build and give manufacturers confidence that vehicle functions and subsystems will integrate and perform as intended.”

Simulation, dSPACE SCALEXIO HiL And The Battery Simulator

The facility combines advanced vehicle simulation, dSPACE SCALEXIO HiL and world-class measurement systems, allowing manufacturers to assess vehicle behaviour, develop control strategies and optimise system performance at an early stage of development.

The platform supports both 2WD and 4WD vehicle architectures and incorporates a 1100 V / 500 kW battery simulator. This enables vehicle-level development and validation activities to begin before production-intent battery hardware is available, allowing engineers to investigate range, energy management, fault handling and control strategies much earlier in the programme.

Hub Dyno Testing In Realistic Operating Conditions

For electric propulsion systems already integrated into a vehicle chassis, testing can be performed by connecting directly to the wheel hubs. High-performance dynamometers accurately reproduce highly transient operating conditions, enabling assessment of everything from legislative drive cycles to advanced vehicle dynamics functions such as torque vectoring.

The temperature-controlled test cell supports testing across a wide range of environmental conditions, including temperatures down to -15°C, allowing manufacturers to evaluate vehicle performance, system robustness and control strategies under both representative and worst-case operating scenarios.

Bruce Campbell added:

“PiL enables vehicle attributes to be signed off, systems debugged and optimised while vehicle build progresses in parallel. Once a prototype vehicle becomes available, development can transition to our 4WD Chassis Dyno, or Hub Dyno PiL testing can continue alongside vehicle-based testing. During our recent hybrid supercar programme, the Hub Dyno proved to be such a versatile and valuable development tool that the customer chose to continue PiL testing in parallel with prototype vehicle testing throughout the programme.”

Powertrain In The Loop: Frequently Asked Questions

What is Powertrain in the Loop testing?

Powertrain in the Loop, or PiL, is a test method in which real powertrain hardware runs on a dynamometer while the rest of the vehicle exists only as a real-time simulation. The models supply the inputs the missing hardware would have provided, such as vehicle mass, road load, driver demand and the behaviour of subsystems that have not been built yet, so the physical hardware behaves as though it were installed in a complete car.

How does Powertrain in the Loop differ from hardware-in-the-loop?

Hardware-in-the-loop generally puts an electronic control unit in the loop with a simulated plant, so the hardware under test is a controller and everything it controls is modelled. Powertrain in the Loop puts the actual mechanical and electrical powertrain in the loop, with real torque going into a dynamometer, and models only the surrounding vehicle. PiL therefore captures physical effects such as inertia, losses, thermal behaviour and transient torque response that a controller-only HiL rig cannot reproduce.

What does a battery simulator do in a powertrain test cell?

A battery simulator is a bidirectional DC power supply that presents the powertrain with the voltage and current characteristics of a traction pack, sourcing and sinking power on demand. CamMotive’s unit is rated at 1100 V and 500 kW. CamMotive says it enables vehicle-level development and validation activities to begin before production-intent battery hardware is available, allowing engineers to investigate range, energy management, fault handling and control strategies much earlier in the programme.

Why test an electric powertrain through the wheel hubs?

Connecting dynamometers directly to the wheel hubs removes the tyres and the road surface from the test while keeping the driveline, differential and any torque-vectoring hardware in the loop. That gives repeatable, precisely measured torque and speed at each corner, which is what is needed to reproduce transient events and to assess per-wheel control strategies. It also allows a vehicle to be tested before it is in a condition to be driven.

Why does a test cell need to run down to -15 degrees Celsius?

Cold degrades almost everything in an EV at once: cell internal resistance rises, usable capacity and charge acceptance fall, lubricant drag increases and cabin heating competes with propulsion for energy. Control and thermal strategies that behave well at 20 degrees can fail their targets near freezing, so validating range, energy management and driveability at low ambient temperature is a separate exercise rather than an extrapolation.

For more simulation news, click here.

Source

The latest technology and engineering news direct to your inbox.

ATN publishes first-party announcements within seven days of release. The summary at the top is written by ATN for engineers; the text below it is the company's own.