ZF Develops High Revolution Drive With Half The Magnet Mass
ZF has developed the High Revolution Drive, a 3-in-1 electric drive spinning at up to 30,000 rpm that needs 50 percent less magnet mass and is nearly 25 percent smaller and lighter than a…
All the latest electric vehicle (EV) technology news from vehicle manufacturers and suppliers in the automotive industry.
All the latest electric vehicle (EV) technology news from vehicle manufacturers and suppliers in the automotive industry.
ZF has developed the High Revolution Drive, a 3-in-1 electric drive spinning at up to 30,000 rpm that needs 50 percent less magnet mass and is nearly 25 percent smaller and lighter than a…
InfiMotion Technology's new off-road dual-motor e-drive has debuted on the Geely K011, delivering 220 kW per motor with a differential-lock controller that can send up to 9,000 Nm to a single wheel.
Peugeot has revealed the RCZ Vision on an STLA One-based architecture, combining Steer-by-Wire, the brand’s first Brake-by-Wire system and a 110 mm solid-state battery developed with Factorial Energy that charges from 10% to 80%…
BMW has unveiled the iX3 M60 xDrive, the most powerful Neue Klasse iX3, pairing a new Gen6 electrically excited rear motor and 420 A inverter with a front motor for 450 kW, plus 400…
Ferrstron Powertrains has road-tested a 150 kW, 400 Nm ferrite-magnet powertrain prototype in a 2.3-ton multi utility vehicle, taking its rare-earth-free heavy-duty motor technology to Technology Readiness Level 6.
LG Electronics will supply its integrated cockpit solution, which combines control of the instrument cluster and infotainment system, for Renault Group's New Trafic E-Tech Electric, the automaker's first mass-produced commercial vehicle on an SDV…
Honda R&D, Taisei and Taisei Rotec have developed the underlying technology for a road-embedded wireless power transfer system that charges EVs, including large commercial vehicles, while they drive, with public-road demonstrations planned from Japan's…
Miko Marczyk has covered 1,338 km across Poland on a single charge in an Audi A6 Sportback e-tron performance, returning 7.09 kWh per 100 km against a WLTP figure of up to 777 km.
Battery immersion cooling is moving from hypercars towards series production. ATN's explainer: how single-phase and two-phase systems work, what published data shows versus cold plates, and who is running it in 2026.
Onsemi has expanded its strategic collaboration with NIO, with EliteSiC enhanced M3e silicon carbide underpinning the carmaker’s shift from 400V to 900V architectures, including the ES9 flagship SUV.
BEV, HEV, PHEV and REEV powertrains compared on the engineering metrics that matter — battery cost, charging access, regulatory exposure and CO2-per-dollar.
Horse Powertrain unveils the X-Range C15 Direct Drive, a hybrid powertrain to replace rear electric drive units on existing BEV platforms.
ETA Green Power launches the ETA-MODEL 20, a fully integrated 3-in-1 electric powertrain that combines motor, controller and onboard charger.
MAHLE has developed HeatX Range+, a heat recovery system that significantly reduces the energy demand of cabin heating in electric vehicles, particularly in winter conditions.
Johan Andersson, Commercial Managing Director of Volklec, explains the importance of achieving mass-scale battery supply chain sovereignty.
Schaeffler leads the ReDriveS project, with 25 partners it will develop an automated, scalable recycling concept for electric axle drives.
Mark Way, Chief Technology Officer at RML Group, explores how immersion cooling unlocks faster charging and better efficiency from current EV battery technologies.
ProLogium and FEV present a solid-state battery module based on ProLogium’s superfluidized all-inorganic lithium ceramic technology.
Niron Magnetics and Bimotal collaborate to develop high-performance electric motors using domestically sourced, rare-earth-free magnets.
Donut Lab and WATT Electric Vehicle Company have partnered to integrate Donut Lab’s in-wheel motor technology into WATT’s ultra-lightweight PACES skateboard platform.